Sprinkler Bases and Stands

Ground spikes, bases and tripod supports for sprinklers

The support beneath a sprinkler determines where it can stand, how the hose approaches it and whether the head remains upright while running. Hengxin lists spike-base and tripod-style sprinkler products alongside supported assemblies. Check each product listing to see whether it contains only a support or also a sprinkler head. Choose the mounting connection and ground surface before treating the stand as interchangeable.

Piquet réglable en alliage d'aluminium pour arroseur à impact, destiné à l'irrigation

Facile à utiliser : raccord pivotant de 3/4″ pour une installation aisée. Le raccordement en série permet d'utiliser plusieurs arroseurs simultanément. Dimensions standard : raccord de tuyau d’arrosage de 3/4″. Étanche : test de pression d’eau effectué avant expédition. Équipé d’un joint torique en caoutchouc qui filtre le sable et les graviers afin de réduire le risque d’obstruction. Matériaux haut de gamme : conçu pour durer et résister à un usage intensif ; pas besoin de s’inquiéter de l’usure. Remarques d'utilisation : veillez à ce que la pression d'eau soit comprise entre 20 PSI et 80 PSI.

À propos de Hengxin

Taizhou Hengxin Valve Technology Co, Ltd. est une entreprise industrielle et commerciale complète qui possède 28 ans d'expérience dans les domaines suivants vanne en laiton fabrication. Nous sommes spécialisés dans conception, production et vente de vannes en laiton, de raccords de tuyauterie, de produits d'irrigation pour le jardin, et OEM/ODM solutions.

  • Excellence en matière de fabrication
  • Assurance qualité
  • Rapport coût-efficacité

Visite de l'usine

Vannes et arroseurs de précision, des solutions globales depuis 1997

Savoir-faire

Choose a support for the surface

A spike enters suitable soil and keeps the water inlet low. A wider base can stand on ground where a spike is less useful. A tripod raises the head above low plants, but its open legs need space and stable footing. No support type is best everywhere. Note the intended surface, surrounding obstacles and whether the sprinkler will be moved regularly.

Check the weight of the assembled head and the direction of hose pull. A hose that approaches from one side can tip or rotate a light support even if the bare stand appears stable. Evaluate the actual head, support and hose together. Where the product has movable legs or an adjustable height, confirm the locked positions on a sample rather than relying on an image.

Match the head connection

Identify the support’s head-mount thread or socket, its seal and the head models approved for it. The water inlet to the base may use another connection altogether. For a replacement base, send the existing head and hose-end samples. A nominal thread size is not enough to confirm that the head seats at the right depth or that the seal works.

Some products in a support range are complete sprinklers with an integrated base or stand. Check the bill of materials before ordering a support-only spare. If the head and stand are sold together, keep the model pair on the packaging so customers can reorder the correct part later.

Compare storage and setup

For temporary watering, note the folded size, setup steps and pieces that can be lost during transport. Check feet, clamps and tightening points after repeated assembly. An outdoor stand may also need inspection for damaged threads and worn joints. Any claimed working height, stability or service life should belong to a named model and test condition.

Send the head model, connection drawing, surface type, preferred working height, hose direction and pack contents through the contact page. The full sprinkler range shows complete watering assemblies if a stand-only component is not required.

Questions des acheteurs

When is a spike base suitable?

A spike needs ground it can enter and hold. Confirm the soil condition and test the assembled sprinkler with its hose attached.

Can any sprinkler head fit any stand?

No. Compare the mounting thread or socket, seating depth and seal with the actual head. Check the stand inlet as a separate connection.

Are all listed items support-only parts?

No. Some products are complete sprinkler assemblies with a head and base. Verify the sales unit before ordering a replacement support.

What information helps select a stand?

Provide the head model, intended surface, working height, hose route, frequency of movement and whether the pack needs a head or support only.

Prendre contact

N'hésitez pas à discuter de vos besoins d'achat avec notre service clientèle.

DEMANDER UN DEVIS